Tuesday, February 23, 2010

Finishing the electrical work

Today we finished the panel, installed the new circuit breaker for the bedroom and install all the fixtures and sockets in the bedroom.

New nice ground bonding in the panel, and some splices to old wires that were not replaced. The next batch of the job is going to include replacing some old wiring to get rid of the old stuff.

2%3A23%3A1003%3A41PM_2.sClrTVl21m5h.jpg 2%3A23%3A1003%3A41PM_4.KCLp6zKWgn6O.jpg

This is a detail of the new arc-fault circuit breaker for the bedroom and a view of the entire panel finished before closing it.

2%3A23%3A1003%3A41PM_3.W37rfFNZ77zy.jpg 2%3A23%3A1003%3A41PM.Mn3jYFMYlbHZ.jpg

After the panel was finished, I did some improvement in the layout of the wires coming out of the panel to be ready for the inspection.

2%3A23%3A1007%3A57PM_2.STDdVzFWHVH9.jpg 2%3A23%3A1007%3A57PM.pIUjNE4DGCDu.jpg

The panel looks very good finished!!! We also included a whole-house surge protector, which takes two circuit breaker’s space.

2%3A23%3A1007%3A57PM_3.gumt32OyJ6EZ.jpg 2%3A23%3A1007%3A57PM_4.dTnEPxkH6lFO.jpg

The bedroom looks really good with the new lights installed.

2%3A23%3A1007%3A55PM_2.F62zK8q4Vb37.jpg



2%3A23%3A1007%3A55PM.SZesfEkbtxDa.jpg




Monday, February 22, 2010

AllPro Electric Panel replacement

Today, I took the day off at work and worked with the electrician from AllPro all day installing the new electrical panel.

We started around 8 AM in the morning. First getting all the materials ready, and then by 9:30 removing the old panel and fixing the new panel to the wall.

2%3A22%3A1011%3A36AM.IdYaXD3Vu909.jpg



I thought we would install conduit to the crawl space and attic, but I was wrong. Because I said that I might not even put a wall there, the electrician started installing flex cable to avoid wasting the time on installing the conduit. Luckily, he ran out of flex cable and had to go pick up some more. When he told his boss (Kevin) what was going on, Kevin called me and let me know that it would be more expensive to do it this way. I immediately told him that I would do a wall to cover the cables and we can start doing good ol’ romex cable.

2%3A22%3A1006%3A33PM.h0ADaOHw8XXb.jpg 2%3A22%3A1008%3A16PM.oM2MUZuFlZJI.jpg



By 8:30 PM, the new panel was in place, power restored, and there were just a few little things to finish on the panel and the entire bedroom wiring.

2%3A22%3A1009%3A55PM.xdjYJjoi5a63.jpg



There were some details to take care of in the panel and the boxes in the crawl space.

2%3A22%3A1008%3A35PM.lljuZk7XPrz1.jpg



The ground rods were in the ground, but not connected yet.

2%3A22%3A1009%3A56PM.b61CPQ03P9Ef.jpg




AllPro Electric Panel replacement

Today, I took the day off at work and worked with the electrician from AllPro all day installing the new electrical panel.

We started around 8 AM in the morning. First getting all the materials ready, and then by 9:30 removing the old panel and fixing the new panel to the wall.

2%3A22%3A1011%3A36AM.G3jLLnuH3odX.jpg



I thought we would install conduit to the crawl space and attic, but I was wrong. Because I said that I might not even put a wall there, the electrician started installing flex cable to avoid wasting the time on installing the conduit. Luckily, he ran out of flex cable and had to go pick up some more. When he told his boss (Kevin) what was going on, Kevin called me and let me know that it would be more expensive to do it this way. I immediately told him that I would do a wall to cover the cables and we can start doing good ol’ romex cable.

2%3A22%3A1006%3A33PM.4auaHfT0O2Sb.jpg 2%3A22%3A1008%3A16PM.aPauHPry2Nut.jpg



By 8:30 PM, the new panel was in place, power restored, and there were just a few little things to finish on the panel and the entire bedroom wiring.

2%3A22%3A1009%3A55PM.o9SyHNiuc3Os.jpg



There were some details to take care of in the panel and the boxes in the crawl space.

2%3A22%3A1008%3A35PM.f1Q2ziOTfqqi.jpg



The ground rods were in the ground, but not connected yet.

2%3A22%3A1009%3A56PM.NMAnvBWZYQq6.jpg




Sunday, February 21, 2010

Preparation work for the panel replacement

Today I have to remove the wall around the electrical panel to be ready to install the new panel, which is bigger and cannot be recessed in the wall as this one is.

2%3A21%3A1011%3A00AM.3W74oi97kpBq.jpg



The demolition work was fun and let me see how poorly the old installation and wall were done. After a lot of work, the panel was ready for removal the next day.

2%3A21%3A1005%3A16PM.Nilhq91uwCfN.jpg 2%3A21%3A1005%3A17PM.efiyrhwEFj1c.jpg

Wednesday, February 17, 2010

Electrical boxes make-up

Today an electrician from AllPro Electric came home to do the initial work of the electrical installation. He made up the electrical boxes and I helped doing some work in the attic.

2%3A17%3A1002%3A53PM.4fxThDDmmdw0.jpg



The boxes look very well made and the inspector will come tomorrow to verify the work.

2%3A20%3A1006%3A03PM.XnBAKyDKLxvJ.jpg



2%3A20%3A1006%3A03PM_2.yXC5Y4Pe0O9F.jpg 2%3A20%3A1006%3A03PM_3.Wlf9iuNMqact.jpg





Sunday, February 14, 2010

Walk in Fort Vancouver

We went for a walk in Fort Vancouver that Julie got from a book she got. The day was perfect for a walk and we all enjoyed it. Sammy was a little spooked, but we don’t know why.

You can get the map for this walk here: http://www.vancouverwalkingmap.com/PDF/Map08small.pdf

Picture1.m0mx2UdPuAXL.jpg


2%3A14%3A1003%3A15PM.f2KLmnLYH2kM.jpg

2%3A14%3A1003%3A32PM.4qsWzobLqhrW.jpg



We did a walk that it’s supposed to be 6 miles, but it did not feel that long. We did not go to the fort because it was the only place where there was people and the walk had been very enjoyable just getting the nice views in silence. Of course we did talk to people and they all told us how cute Sammy was.

2%3A14%3A1003%3A42PM.XeeQoMNssTXd.jpg



Saturday, February 13, 2010

Test trip with Sammy in the van

I cut a door to the back of the van to use it with Sammy when I want to go out with him, instead of trying to protect the back seat of the BMW for him.

2%3A13%3A1010%3A14PM_2.AS6En3g9HAa9.jpg 2%3A13%3A1010%3A14PM.j9K9lc5XoHbB.jpg

Sammy walk around trying to find his place inspecting and smelling everything, but he finally settled down and looked pretty comfortable right away.

2%3A13%3A1010%3A16PM.cF3dRT2ztJaC.jpg



Sunday, February 7, 2010

Julie walk with Sammy in Vancouver, WA

Julie took Sammy for a walk in Vancouver today. It was a 4 mile walk and left Sammy totally tired. He slept like a baby that night.

2%3A7%3A1002%3A37PM.OmAWDbOvZW0d.jpg